Comica Audio BoomX-D UC1 Ultracompact Digital Wireless Microphone System for Android Smartphones (2.4 GHz)

RM725.00

Comica Audio BoomX-D UC1 Ultracompact Digital Wireless Microphone System for Android Smartphones (2.4 GHz)

Designed for mobile journalists, videographers, and vloggers, the Comica BoomX-D UC1 is an ultracompact, true wireless digital microphone system with one microphone and a dual-channel receiver that can also be used to receive a second microphone (available separately). It offers a complete solution for recording dialogue, interviews, and speech with one person talking—directly to an Android smartphone or a USB Type-C device.

The ultralightweight BoomX-D UC1 consists of an ultracompact clip-on transmitter with its own built-in omnidirectional microphone and a separate lavalier microphone. It also comes with a tiny receiver that mounts on and plugs directly into the USB Type-C port of your phone. To ensure that you are capturing a clean signal, you can monitor your mic via the receiver’s 3.5mm headphone output while recording.

The system delivers reliable transmission with a clear sound at a distance up to 164′. The transmitter’s built-in rechargeable batteries provide up to 5 hours of operation. Versatile and extremely easy to use with simple controls, the BoomX-D UC1 is well suited for content creators of any experience level.

Built-In Mic for True Wireless

The transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphone.
For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent. You can also hold the transmitter in your hand and use it as a handheld microphone.
The On/Off switch doubles as a mute button.

Lavalier Mic Included

For a more discreet setup, use the small lavalier microphone, which can be easily concealed away from the camera’s eye.

Plug-and-Play and Easy-to-Operate Wireless

This plug-and-play system is easy to use. It comes pre-paired at the factory; connect it to your phone, turn it On, and you’re ready to start recording.
Dedicated gain buttons on the receiver allow quick and effortless adjustment of the signal level for each microphone independently.
The transmitter has a display that shows signal strength, audio level, mono/stereo configuration, and battery life.
The transmitter is powered via a built-in lithium-ion rechargeable battery. It can also be powered via USB, even while in use, giving you near unlimited operating time.
The receiver is powered via the phone.

Two Microphones into One Receiver

If you need to expand your system with a second microphone, the two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from two mic/transmitters.
You have the option to switch between mono or stereo on the receiver: Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to isolate each person’s dialog and adjust each level individually later in post.

Easy 2.4 GHz Digital Wireless

Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the BoomX-D digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
The system automatic changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 164 feet. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.

Key Features

For Journalists, Vloggers, YouTubers
1 x Transmitter with Built-In Mic & Lav
Ultracompact 2-Channel Plug-In Receiver
5-Hour Rechargeable Battery + USB

Technical specification

System

Wireless Transmission	Digital 2.4 GHz
Included Transmitters	1 x Clip-On with Microphone
Diversity	Non-Diversity
RF Frequency Band	2400 to 2483.5 MHz
RF Channel Scanning	Auto-Scan
Max Operating Range	164′ / 50 m (Line of Sight)
Max Systems per Setup	2
Sample Rate/Resolution	48 kHz / 16-Bit
Latency	<20 ms (Maximum)

Receiver

Form Factor	Plug-In
Mounting Options	Plug-In
Antenna	1 x Internal
Number of Audio Channels	2
Audio I/O	1 x 1/8″ / 3.5 mm TRS Female Unbalanced Headphone Output
Gain Range	0 to 12 dB
USB/Lightning Connectivity	1 x USB Type-C (Audio, Bus Power)
RF Output Power	10 mW
Power Requirements	Bus Power (USB)
Display & Indicators	1 x LCD (AF Level, Battery Status, Output Level)
Housing	Plastic
Operating Temperature	32 to 122°F / 0 to 50°C
Dimensions	1.3 x 0.5 x 2.8″ / 33 x 13 x 70 mm
Weight	0.7 oz / 19 g

Transmitter

Form Factor	Clip-On with Microphone
RF Output Power	10 mW
Audio I/O	1 x 1/8″ / 3.5 mm TRS Female Unbalanced Input
Muting	Off/On Switch
Auto-Level Control	No
Frequency Response	80 Hz to 20 kHz
Antenna	1 x Internal
Approximate RF Sensitivity	-86 dBm
Power Requirements	Battery, Bus Power (USB)
Battery Type	1 x Built-In Rechargeable
Internal Battery Capacity	300 mAh
Approx. Battery Life	5 Hours (Lithium Rechargeable)
USB/Lightning Connectivity	1 x USB Type-C (Bus Power, Charging)
Display & Indicators	1 x LCD (Audio Level, Battery Status, Mute, Signal Strength)
Housing	Plastic
Operating Temperature	32 to 122°F / 0 to 50°C
Dimensions	1.5 x 0.9 x 2.2″ / 39 x 22 x 55 mm
Weight	1 oz / 29 g